Highland Park CB8V
CB8V-110W · wheels included · 110 V · Cabbing machine
The CB8V drives six eight-inch wheels with a variable-speed, 1 hp motor. For 1½-inch-wide wheels, Highland Park specifies 1½-inch gaps between wheels.
Specifications
- Wheel diameter
- 8″
- Motor
- 1 hp
- Speed
- Variable, 0–1,725 rpm
- Voltage
- 110 V / 60 Hz
- Machine weight
- 101 lb (manual)
- Dimensions
- Not stated in the listing or manual; ask Highland Park for bench dimensions
- Water supply
- Drip feed; ask which reservoir equipment is included
- Trim saw
- Not included
Identify this configuration
The CB8V-110W is the 110 V version sold with wheels. Highland Park also sells replacement drive modules for older CB8 machines; check your machine’s model plate before choosing electrical parts.
Included equipment
The listed package includes 80 and 220 grit plated grinding wheels; 280, 600, 1,200 and 3,000 grit resin wheels; a spacer kit; an LED lamp and an aluminium end plate. Ask Highland Park which water reservoir equipment and final-polishing pads come with this package.
Replacement parts
Highland Park publishes a CB8V manual with exploded views and part numbers. The manual specifies a 1-inch shaft and gives the machine’s weight as 101 lb. The product page also has CB8V parts diagrams. Check the spacer positions and each wheel’s diameter, width and bore before ordering replacements.
Highland Park CB8V manual (PDF) ↗
CB8V parts diagrams on the product page ↗
Measure a replacement wheel →
Highland Park machines & parts →
Parts & manuals index →