VEVOR VV-JH-6P
VV-JH-6P · Cabbing machine
VEVOR's six-wheel, six-inch machine has a 2/5 hp motor and separate water controls for each wheel. Its September 2026 US listing priced it below the CabKing 6 and Highland Park CB6V.
Specifications
- Wheel diameter
- 6″
- Motor
- 2/5 hp
- Speed
- 1,800 rpm
- Voltage
- 120 V / 60 Hz (manual)
- Machine weight
- 58 lb including accessories (listing)
- Dimensions
- 26.8 × 13.4 × 13.0 in
- Water supply
- Separate flow control for each wheel
- Trim saw
- Saw-cutting module included
Identify this configuration
VEVOR sells this machine as product 010308981389. It also lists a 6-inch, 1/4 hp machine, product 010819337879, under the same model number. Quote the product number when you compare specifications or order parts.
Included equipment
The listing describes two diamond wheels, four resin wheels, a cutting module, side-polishing attachment and lamp.
Replacement parts
VEVOR's current manual covers the VV-JH-6P and VV-JH-8P. For the 6-inch machine it gives 120 V / 60 Hz, a maximum of 300 W, 1,800 rpm and a 0.7-inch motor shaft. Its spare-parts list shows the accessories in the box, such as the pump, hand rests, saw blade and clamping sleeve, but gives no part numbers or exploded view. The manual for product 010819337879 describes a different machine: 180 W, 1,620 rpm and 6 × 1.5 in wheels with 1-inch arbor holes. Measure the wheel bore before ordering replacements, and ask VEVOR support for other parts.
VEVOR manual for VV-JH-6P and VV-JH-8P (PDF) ↗
VEVOR manual for product 010819337879, 180 W (PDF) ↗
Measure a replacement wheel →
VEVOR machines & parts →
Parts & manuals index →