Checked 22 September 2026
VEVOR cabbing machines
VEVOR sells six-inch and eight-inch cabbing machines, and two different six-inch machines share the VV-JH-6P model number. The product number and rating plate identify which motor and wheels a machine has.
VV-JH-6P & VV-JH-8P
VEVOR sells two six-wheel cabbing machines under its own name: the 6-inch VV-JH-6P, US product 010308981389, and the 8-inch VV-JH-8P, product 010594896621. Both have a direct-drive motor with no belt, a 304 stainless steel housing, an adjustable LED lamp and a water valve for each wheel.
| Specification | VV-JH-6P (010308981389) | VV-JH-8P (010594896621) |
|---|---|---|
| Wheel diameter | 6 in | 8 in |
| Motor | 2/5 hp, 300 W maximum | 3/4 hp, 550 W maximum |
| Motor shaft | 0.7 in | 1 in |
| Speed | 1,800 rpm, fixed | 1,800 rpm, fixed |
| Supply | 120 V AC, 60 Hz | 120 V AC, 60 Hz |
| Size (L × W × H) | 26.8 × 13.4 × 13.0 in | 29.2 × 13.4 × 13.0 in |
| Weight with accessories | 58 lb | 79 lb |
| Listed price (USD) | $1,119.90 | $1,579.90 |
VEVOR 6-inch listing; VEVOR 8-inch listing. Supply and motor shafts from the VV-JH-6P / VV-JH-8P manual, page 6 (PDF). The prices are VEVOR's regular prices; on 23 September 2026 both listings showed lower sale prices, $1,007.91 and $1,169.91. VEVOR sends visitors outside the US to a regional site, where the same machine may carry a different product number, specification and price.
Each machine comes with 80 and 220 grit diamond wheels, 280, 600, 1,200 and 3,000 grit resin wheels, a diamond lap, a saw cutting module with one blade, a side-polishing attachment and a water pump. VEVOR gives the grits, blade and pump in its answers to buyers' questions under the 6-inch listing. The manual's accessory list adds two drain pipes, two hand rests, four splash guards, two storage boxes, a clamping sleeve set, a water pipe, a cutting aid stand, six foot pads and the wrenches. Neither the listings nor the manual mention a polishing pad.
One model number, two machines
VEVOR also sells a smaller 6-inch machine, product 010819337879, under the same model number, VV-JH-6P. It has a different motor, speed and manual, so use the product number, not the model number, to identify a VEVOR machine.
| Product | Motor | Speed | Wheels | Manual | Listed price (USD) |
|---|---|---|---|---|---|
| 010308981389 | 2/5 hp, 300 W maximum | 1,800 rpm | 6 in diameter; width and hole not stated | VV-JH-6P / VV-JH-8P (PDF) | $1,119.90 |
| 010819337879 | 1/4 hp, 180 W | 1,620 rpm | 6 × 1½ in, 1 in hole | Earlier VV-JH-6P (PDF) | $1,089.90 |
Figures for product 010819337879 from its listing's specification table and its manual, pages 11 and 16 (PDF). The listing's title and the manual's setup steps say 1,800 rpm, but the listing's specification table and the manual's rating on page 16 both say 1,620 rpm; the rating plate on the motor settles it. That manual also lists a full-face diamond lap and a canvas polishing pad in the box.
Wheels & parts
For products 010308981389 and 010594896621, VEVOR doesn't publish the width or centre hole of the wheels, the spacers between them or the maximum speed the wheels are rated for. The 1-inch hole on the 180 W machine may not apply. The box includes a clamping sleeve set that the manual doesn't explain, so measure a fitted wheel's hole and the shaft or sleeve it sits on before you order a replacement.
The wheels come off in two assemblies of three, one screwed onto each side of the motor; stop the machine and let the wheels come to rest before you remove either. The manual's parts list names the accessories but gives no part numbers or exploded drawing. Ask VEVOR through its contact page which wheels, pumps and valves it can supply for your product number. VV-JH-6P / VV-JH-8P manual, page 14 (PDF).
Checks before buying or ordering wheels
These checks apply to a new or a used machine. For a used one, ask the seller for the original listing or order, so you know the product number.
| Check | What to confirm |
|---|---|
| Product number | Record the listing's product number and photograph the machine's rating plate. One model number covers two motors. |
| Voltage | The machines run on 120 V AC, 60 Hz. The manual recommends a GFCI (residual-current) outlet and says not to use an extension cord. |
| Wheel hole and width | Measure a fitted wheel's hole, width and hub, and the shaft or sleeve it sits on. A replacement wheel must fit freely on the shaft, directly or through a bushing. |
| Wheel speed rating | Check that each replacement wheel is marked for at least 1,800 rpm. |
| Grits | Read the grit printed on each wheel and note its position before you remove anything. |
| Water | Provide two buckets of at least 5 gallons, one of clean water for the pump and one for the drain; neither comes in the box. The pump has no switch and must stay under water. Expect to use 1–2 gallons an hour. |
| Accessories | Confirm the diamond lap, saw cutting module and blade, and side-polishing attachment are present. |
Voltage, water and setup from the VV-JH-6P / VV-JH-8P manual, pages 4 and 8–12 (PDF). The wheel checks follow the US workplace rule for abrasive wheels, OSHA 1910.215(d), which requires checking a wheel's marked maximum speed before mounting it. The cabbing wheels reference explains how to measure a wheel.
Manuals
The September 2026 listings link the same "User manual-en" PDF, a multilingual manual for the VV-JH-6P and VV-JH-8P with English on pages 1–14. It covers safety, specifications, accessories, setup, the water system, the grinding sequence from 80 to 3,000 grit, troubleshooting and basic maintenance. VV-JH-6P / VV-JH-8P manual (PDF). Product 010819337879 has its own earlier VV-JH-6P manual (PDF).
Parts of the current manual are generic. It gives about 60 lb for either model, where the 8-inch listing states 79 lb. Its warning on page 2 says to wear gloves, but its safety list on page 4 says not to wear gloves near moving parts, where they can catch. Follow the safety list. Manuals for other makers' machines are listed on the parts and manuals page.